Ryujinx/src/ARMeilleure/Statistics.cs

97 lines
2.1 KiB
C#
Raw Normal View History

[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
#if M_PROFILE
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
using System;
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
#endif
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
using System.Collections.Concurrent;
using System.Collections.Generic;
using System.Diagnostics;
using System.Linq;
using System.Text;
namespace ARMeilleure
{
public static class Statistics
{
private const int ReportMaxFunctions = 100;
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
#if M_PROFILE
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
[ThreadStatic]
private static Stopwatch _executionTimer;
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
#endif
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
private static readonly ConcurrentDictionary<ulong, long> _ticksPerFunction;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
static Statistics()
{
_ticksPerFunction = new ConcurrentDictionary<ulong, long>();
}
public static void InitializeTimer()
{
#if M_PROFILE
if (_executionTimer == null)
{
_executionTimer = new Stopwatch();
}
#endif
}
internal static void StartTimer()
{
#if M_PROFILE
_executionTimer.Restart();
#endif
}
internal static void StopTimer(ulong funcAddr)
{
#if M_PROFILE
_executionTimer.Stop();
long ticks = _executionTimer.ElapsedTicks;
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
TicksPerFunction.AddOrUpdate(funcAddr, ticks, (key, oldTicks) => oldTicks + ticks);
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
#endif
}
internal static void ResumeTimer()
{
#if M_PROFILE
_executionTimer.Start();
#endif
}
internal static void PauseTimer()
{
#if M_PROFILE
_executionTimer.Stop();
#endif
}
public static string GetReport()
{
int count = 0;
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
StringBuilder sb = new();
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 18:56:22 +00:00
sb.AppendLine(" Function address | Time");
sb.AppendLine("--------------------------");
KeyValuePair<ulong, long>[] funcTable = _ticksPerFunction.ToArray();
foreach (KeyValuePair<ulong, long> kv in funcTable.OrderByDescending(x => x.Value))
{
long timeInMs = (kv.Value * 1000) / Stopwatch.Frequency;
sb.AppendLine($" 0x{kv.Key:X16} | {timeInMs} ms");
if (count++ >= ReportMaxFunctions)
{
break;
}
}
return sb.ToString();
}
}
[ARMeilleure] Address dotnet-format issues (#5357) * dotnet format style --severity info Some changes were manually reverted. * dotnet format analyzers --serverity info Some changes have been minimally adapted. * Restore a few unused methods and variables * Silence dotnet format IDE0060 warnings * Silence dotnet format IDE0052 warnings * Address or silence dotnet format IDE1006 warnings * Address or silence dotnet format CA2208 warnings * Address dotnet format CA1822 warnings * Address or silence dotnet format CA1069 warnings * Silence CA1806 and CA1834 issues * Address dotnet format CA1401 warnings * Fix new dotnet-format issues after rebase * Address review comments * Address dotnet format CA2208 warnings properly * Fix formatting for switch expressions * Address most dotnet format whitespace warnings * Apply dotnet format whitespace formatting A few of them have been manually reverted and the corresponding warning was silenced * Add previously silenced warnings back I have no clue how these disappeared * Revert formatting changes for OpCodeTable.cs * Enable formatting for a few cases again * Format if-blocks correctly * Enable formatting for a few more cases again * Fix inline comment alignment * Run dotnet format after rebase and remove unused usings - analyzers - style - whitespace * Disable 'prefer switch expression' rule * Add comments to disabled warnings * Remove a few unused parameters * Adjust namespaces * Simplify properties and array initialization, Use const when possible, Remove trailing commas * Start working on disabled warnings * Fix and silence a few dotnet-format warnings again * Address IDE0251 warnings * Address a few disabled IDE0060 warnings * Silence IDE0060 in .editorconfig * Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas" This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e. * dotnet format whitespace after rebase * First dotnet format pass * Remove unnecessary formatting exclusion * Add unsafe dotnet format changes * Change visibility of JitSupportDarwin to internal
2023-06-26 05:25:06 +00:00
}