This allows bindless handles to be found for image/texture instructions with predicates, when the assignment of the texture handle is within the same predicate.
This seems to cover the remaining bindless handles that compilers seem to be creating due to optimizations.
Will affect newer UE4 games, and games by NdCube (Super Mario Party, Clubhouse Games)
* Improve Buffer Textures and flush Image Stores
Fixes a number of issues with buffer textures:
- Reworked Buffer Textures to create their buffers in the TextureManager, then bind them with the BufferManager later.
- Fixes an issue where a buffer texture's buffer could be invalidated after it is bound, but before use.
- Fixed width unpacking for large buffer textures. The width is now 32-bit rather than 16.
- Force buffer textures to be rebound whenever any buffer is created, as using the handle id wasn't reliable, and the cost of binding isn't too high.
Fixes vertex explosions and flickering animations in UE4 games.
* Set ImageStore flag... for ImageStore.
* Check the offset and size.
* Improve handling for unmapped GPU resources
- Fixed a memory tracking bug that would set protection on empty PTEs
- When a texture's memory is (partially) unmapped, all pool references are forcibly removed and the texture must be rediscovered to draw with it. This will also force the texture discovery to always compare the texture's range for a match.
- RegionHandles now know if they are unmapped, and automatically unset their dirty flag when unmapped.
- Partial texture sync now loads only the region of texture that has been modified. Unmapped memory tracking handles cause dirty flags for a texture group handle to be ignored.
This greatly improves the emulator's stability for newer UE4 games.
* Address feedback, fix MultiRange slice
Fixed an issue where the size of the multi-range slice would be miscalculated.
* Update Ryujinx.Memory/Range/MultiRange.cs (feedback)
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Mary <thog@protonmail.com>
I happened to notice this when checking Ryu's IPC structures. After double checking with RE it seems the current check is incorrect so use the correct member to fix that.
* Initial implementation (3d tex mips broken)
This works rather well for most games, just need to fix 3d texture mips.
* Cleanup
* Address feedback
* Copy Dependencies and various other fixes
* Fix layer/level offset for copy from view<->view.
* Remove dirty flag from dependency
The dirty flag behaviour is not needed - DeferredCopy is all we need.
* Fix tracking mip slices.
* Propagate granularity (fix astral chain)
* Address Feedback pt 1
* Save slice sizes as part of SizeInfo
* Fix nits
* Fix disposing multiple dependencies causing a crash
This list is obviously modified when removing dependencies, so create a copy of it.
* Fix wrong VA being passed to VirtualMemoryEvent
* Remove unnecessary type in discard
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Revise SystemInfo
Cleans up and adds a bit more info (logical core count and available mem at launch) to logs.
- Extract CPU name from CPUID when supported.
- Linux: Robust parsing of procfs files
- Windows: Prefer native calls to WMI
- Remove unnecessary virtual specifiers
* Address gdkchan's comments
* Address AcK's comments
* Address formatting nits
* Haydn: Fix race condition in SoundIO Update implementation
This should fix weird crashes happening for some people with SoundIO.
Fix#2062
* haydn: Make SoundIO session lock-free
* ci: Use Github artifacts for PRs
This PR extends the build job by upload artifacts for all PRs.
The version of those builds is set to "1.0.0-<git_short_hash>" and those
builds have the updater explicitly disabled.
With this in place, we will be able to disable ApppVeyor on PRs.
* Add actions to comment build links
As Github doesn't provide links to unlogged users, we use nightly.link for that.
* Address Ac_k's comments
* Fix virtual address overflow near ulong limit
* Fix comments
* Improve overflow checking for large size values
* Add overflow checking to AddressSpaceManager class
* Add overflow protection to read and write functions
* Haydn: Part 1
Based on my reverse of audio 11.0.0.
As always, core implementation under LGPLv3 for the same reasons as for Amadeus.
This place the bases of a more flexible audio system while making audout & audin accurate.
This have the following improvements:
- Complete reimplementation of audout and audin.
- Audin currently only have a dummy backend.
- Dramatically reduce CPU usage by up to 50% in common cases (SoundIO and OpenAL).
- Audio Renderer now can output to 5.1 devices when supported.
- Audio Renderer init its backend on demand instead of keeping two up all the time.
- All backends implementation are now in their own project.
- Ryujinx.Audio.Renderer was renamed Ryujinx.Audio and was refactored because of this.
As a note, games having issues with OpenAL haven't improved and will not
because of OpenAL design (stopping when buffers finish playing causing
possible audio "pops" when buffers are very small).
* Update for latest hexkyz's edits on Switchbrew
* audren: Rollback channel configuration changes
* Address gdkchan's comments
* Fix typo in OpenAL backend driver
* Address last comments
* Fix a nit
* Address gdkchan's comments
* Fix updater breaking user run permissions on *nix
The updater currently sets the permissions to user run only when the yes button is clicked, this changes it to run on Updater.cs after it's done updating as it should.
* Fix nits
* Use multiple threads to download different chunks of an update simultaneously. This reduces time to complete the download significantly.
* Remove dirty-flag check (for test purposes)
* Clean up updater code.
* Include fallback to single-threaded updater if mt fails
* Reduce connection count to 4.
* Improve fallback on error.
Correct issue where data was missing during download due to total build size not being cleanly divisble by the connection count.
Cleaned up unnecessary code.
* Add missing return statements
* Fix alignment
* Alignment
* More alignment
* Rely on content-range request instead of xml/json size property.
* Re-instate dirty checking and version checking to move into review stage.
* Address comments
* Address comments
* Comments
* Comments
* Final...?
* final final
* final final final nit
* Use Array.Copy as requested by rip
* Updated some names for clarity.
* Move addition into for loop (to shorten line width)
* Add missing semicolon -- forgot to stage :9
* Implement VCNT based on AArch64 CNT
Add tests
* Update PTC version
* Address LDj's comments
* Explicit size in encoding
* Tighter tests
* Replace SoftFallback with IR helper
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Reduce one BitwiseAnd from IR fallback
Based on popcount64b from https://en.wikipedia.org/wiki/Hamming_weight#Efficient_implementation
* Rename parameter and add assert
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* PPTC & Pool Enhancements.
* Avoid buffer allocations in CodeGenContext.GetCode(). Avoid stream allocations in PTC.PtcInfo.
Refactoring/nits.
* Use XXHash128, for Ptc.Load & Ptc.Save, x10 faster than Md5.
* Why not a nice Span.
* Added a simple PtcFormatter library for deserialization/serialization, which does not require reflection, in use at PtcJumpTable and PtcProfiler; improves maintainability and simplicity/readability of affected code.
* Nits.
* Revert #1987.
* Revert "Revert #1987."
This reverts commit 998be765cf.
* This should fix issue #1374 in Linux
Changes:
- Bind buttons by detecting the transition from down to up.
- Bind axis by detecting movement from value higher than 50% to a value lower than 50%.
Caveats:
- I have tested only with DS3 in Linux (Fedora 32).
- ZL and ZR detection works by accident. This code doesn't take negative axis into account.
The reason it works is because axis are managed in absolute value. So when pressing ZL/ZR
axis value goes from -1 to 1 (or 1 to 0 and back to 1) and this hits the axis detector.
- Likely I have broken all the other controllers xD (testing needed).
* Assign keyboardPressed
* Make a more robust detection of pressed buttons when using a controller
* Add interface to bind buttons from Joystick and Keyboard
* Fix style issues after code review by @AcK77 (Thanks!)
* Move new classes to Ryujinx.Ui.Input namespace
* Use explicit types instead of var
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add a new empty line before
* Up
Co-authored-by: Jose Padilla <jose@prensalink.com>
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Make Windows DPI aware to display properly on high-resolution screens.
* remove empty line
* Don't use app manifest, set process dpi aware programatically.
Store variables in Program.cs for use instead of re-creating them per class/ method.
* Fix for linux/osx
* Add braces
* Re-use manifest. It appears to be required on linux.
* Undo previous commit -- it appears linux was simply never affected.
* Addressed AcK's comments
* Remove unused usings
* Address comments by AcK #2
* Re-order
* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.
* Additional code cleanup
* Remove "global::" reference.
This PR fix an issue introduced on last IPC rewrite PRs where some returned buffer size have to be explicit now.
`GetClientId` without an explicit buffer size return some garbage to the guest and then `nifm` service crashes because of a wrong ClientId. It's fixed now.
Horizon Chase Turbo and Doom regression are fixed now. (Probably some other games too)
* Enable PTE null checks again
* Do address validation on EmitPtPointerLoad, and make it branchless
* PTC version increment
* Mask of pointer tag for exclusive access
* Move mask to the correct place
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Implement "Hide Cursor On Idle" option
Adds a general option to autohide the cursor after 8s have elapsed.
* Fix cursor not hiding on Windows and dispose it
* Don't dispose cursor, fix var names
* Abide by the GNOME documentation
* Fix nits
* Disabled by default, make it so it doesn't utilize any timer
* Remove *NIX time and extra lines
* Don't calculate if option is disabled
* Move if case
* Fix alignment
* Update Joy-Con Images 2
This Updates the Joy-Con images, Changes include, adding a top view to the {Joy-Con Pair} image and {Joy-Con Left and Right} Images and adding a side view to {Joy-Con Left and Right} images, the colours
should be less washed out as well and I also decided to clean up the raw image because even though you could not see it in the GUI, the Images themselves looked very messy when opened in a Vector tool
* Fix Sily Right Joy Con mistake
* Make ZL and ZR more visable
* Improve compatibility of the inline keyboard with some games
* Send an empty first text to avoid crashing some games
* Implement SetCustomizedDictionaries and fix SetCustomizeDic
* Expand Bg and Fg abbreviations in the swkbd applet
* Fix variable names and add comments to software keyboard
- Bind toggle events after setting up their current values. This fixes the issue where the config is saved 10 times when the main window is opened 😬
- Write to disk immediately to decrease the chances of corruption
* Added IsUserSystemClockAutomaticCorrectionEnabled
This is used when a game want to check if you game is synced with a server
* Update ISystemSettingsServer.cs
* Implemented OpenDataStorageWithProgramIndex
* Update IFileSystemProxy.cs
* Commited that file on accidant
* Update IFileSystemProxy.cs
* Revert "Merge branch 'master' of https://github.com/Joshi234/Ryujinx"
This reverts commit 375f430455, reversing
changes made to 672e2c8f7d.
* Revert "Update IFileSystemProxy.cs"
This reverts commit 672e2c8f7d.
* Update IFileSystemProxy.cs
* Update ISystemSettingsServer.cs
* removed accidantel addition of IFileSystemProxy.OpenDataStorageWithProgramIndex
* Update Ryujinx.HLE/HOS/Services/Settings/ISystemSettingsServer.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Update Ryujinx.HLE/HOS/Services/Settings/ISystemSettingsServer.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Fix formating and add missing stub
* Update ISystemSettingsServer.cs
* Update ISystemSettingsServer.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Optimization | Modify Add Instruction to use LEA instead.
Currently, the add instruction requires 4 registers to take place. By using LEA, we can effectively perform the same working using 3 registers, reducing memory spills and improving translation efficiency.
* Fix IsSameOperandDestSrc1 Check for Add
* Use LEA if Dest != SRC1
* Update IsSameOperandDestSrc1 to account for Cases where Dest and Src1 can be same for add
* Fix error in logic
* Typo
* Add paranthesis for clarity
* Compare registers as requested.
* Cleanup if statement, use same comparison method as generateCopy
* Make change as recommended by gdk
* Perform check only when Add calls are made
* use ensure sametype for lea, fix else
* Update comment
* Update version #
