Merge branch 'feature/lab-2' into dev

Tutorials/Lab 2 - Switch Configuration/README.md

@@ -0,0 +1,76 @@
+# Lab 02 - Switch Configuration
+> ***Objectives:***
+> - Ensure PCs and switches are connected properly
+>   - Cable types
+>     - PC-SW: straight cables
+>     - SW-SW: ~~gay~~ crossover cables
+>   - Connections
+>     - Connect PCs to ports 1-3 and 11-13 of switches
+>     - Connect switches together with ports 23 and 24
+> - Configure switches properly
+>   - Rename switches to `SW1`-`SW4`
+>   - Assign ports 1-10 to VLAN 10
+>   - Assign ports 11-20 to VLAN 20
+>   - Set spanning-tree `portfast` on ports 1-20
+>   - Set ports 22-24 as trunks for VLAN 10 and 20
+>   - Set spanning-tree `portfast trunk` for ports 22-24
+>   - Set `SW2` to be spanning-tree root primary for VLAN 10 and root secondary for VLAN 20
+>   - Set `SW3` to be spanning-tree root secondary for VLAN 20
+> - Configure static IP addresses for at least 3 computers per switch
+
+
+## Basic Configuration
+Run this configuration on each Switch replacing `{x}` with the switch number:
+
+```sh
+enable
+configure terminal
+hostname SW{x}
+
+interface range fastEthernet 0/1-10
+switchport mode access
+switchport access vlan 10
+
+interface range fastEthernet 0/11-20
+switchport mode access
+switchport access vlan 20
+
+interface range fastEthernet 0/1-20
+spanning-tree portfast
+
+interface range fastEthernet 0/22-24
+switchport mode trunk
+switchport trunk allowed vlan 10,20
+spanning-tree portfast trunk
+
+exit
+exit
+disable
+exit
+```
+
+## Configuration of `SW2`
+```sh
+enable
+configure terminal
+spanning-tree vlan 10 root primary
+spanning-tree vlan 20 root secondary
+
+exit
+exit
+disable
+exit
+```
+
+## Configuration of `SW3`
+```sh
+enable
+configure terminal
+spanning-tree vlan 10 root secondary
+spanning-tree vlan 20 root primary
+
+exit
+exit
+disable
+exit
+```