Tutorials/Lab 2 - Switch Configuration/README.md

@@ -1,76 +0,0 @@
-# Lab 02 - Switch Configuration
-> ***Objectives:***
-> - Ensure PCs and switches are connected properly
->   - Cable types
->     - PC-SW: straight cables
->     - SW-SW: ~~gay~~ crossover cables
->   - Connections
->     - Connect PCs to ports 1-3 and 11-13 of switches
->     - Connect switches together with ports 23 and 24
-> - Configure switches properly
->   - Rename switches to `SW1`-`SW4`
->   - Assign ports 1-10 to VLAN 10
->   - Assign ports 11-20 to VLAN 20
->   - Set spanning-tree `portfast` on ports 1-20
->   - Set ports 22-24 as trunks for VLAN 10 and 20
->   - Set spanning-tree `portfast trunk` for ports 22-24
->   - Set `SW2` to be spanning-tree root primary for VLAN 10 and root secondary for VLAN 20
->   - Set `SW3` to be spanning-tree root secondary for VLAN 20
-> - Configure static IP addresses for at least 3 computers per switch
-
-
-## Basic Configuration
-Run this configuration on each Switch replacing `{x}` with the switch number:
-
-```sh
-enable
-configure terminal
-hostname SW{x}
-
-interface range fastEthernet 0/1-10
-switchport mode access
-switchport access vlan 10
-
-interface range fastEthernet 0/11-20
-switchport mode access
-switchport access vlan 20
-
-interface range fastEthernet 0/1-20
-spanning-tree portfast
-
-interface range fastEthernet 0/22-24
-switchport mode trunk
-switchport trunk allowed vlan 10,20
-spanning-tree portfast trunk
-
-exit
-exit
-disable
-exit
-```
-
-## Configuration of `SW2`
-```sh
-enable
-configure terminal
-spanning-tree vlan 10 root primary
-spanning-tree vlan 20 root secondary
-
-exit
-exit
-disable
-exit
-```
-
-## Configuration of `SW3`
-```sh
-enable
-configure terminal
-spanning-tree vlan 10 root secondary
-spanning-tree vlan 20 root primary
-
-exit
-exit
-disable
-exit
-```

Tutorials/Lab 4 - Dynamic Routing/README.md

@@ -1,93 +0,0 @@
-# Lab 04 - Dynamic Routing
-> ***Objectives:***  
-> - Replicate Internet configuration by setting up a chain of 3 routers
->   - `EE`: Enterprise switch (the switch of the company or home)
->   - `ISP`: The router of the internet service provider
->   - `NET`: The router of the provider of a website
->   - `SERVER` the web server providing the website
-> - Set IP address of server and routers
-> - Enable OSPF protocol on all routers
-> - Try to ping the webserver from the `EE` router
-
-The lab is realized in `./Networks/Lab 04.ptk` in branch `feature/lab-4`
-
-## Router Configuration
-Router `EE`:
-```sh
-enable
-configure terminal
-hostname EE
-
-interface fastEthernet0/1
-ip address 1.0.0.1 255.0.0.0
-no shutdown
-
-interface fastEthernet0/0
-ip address 10.123.0.3 255.255.0.0
-no shutdown
-
-router ospf 1337
-network 1.0.0.0 0.255.255.255 area 0
-
-exit
-exit
-disable
-exit
-```
-
-Router `ISP`:
-```sh
-enable
-configure terminal
-hostname ISP
-
-interface fastEthernet0/0
-ip address 1.0.0.2 255.0.0.0
-no shutdown
-
-interface fastEthernet0/1
-ip address 2.0.0.1 255.0.0.0
-no shutdown
-
-router ospf 1337
-network 1.0.0.0 0.255.255.255 area 0
-network 2.0.0.0 0.255.255.255 area 0
-
-exit
-exit
-disable
-exit
-```
-
-Router `NET`:
-```sh
-enable
-configure terminal
-hostname NET
-
-interface fastEthernet0/0
-ip address 2.0.0.2 255.0.0.0
-no shutdown
-
-interface fastEthernet0/1
-ip address 3.0.0.1 255.0.0.0
-no shutdown
-
-router ospf 1337
-network 2.0.0.0 0.255.255.255 area 0
-network 3.0.0.0 0.255.255.255 area 0
-
-exit
-exit
-disable
-exit
-```
-
-## Test Change
-On Router `EE`:
-```sh
-enable
-ping 3.3.3.3
-disable
-exit
-```