ST1Tutorials/Tutorials/M5 Lab 3 - VLAN Routing/README.md

Lab 03 - VLAN Routing

Objectives:

• Use Lab 02 setup
• Add the routers R1 and R2
• Create a subinterface FE0/0.10 for VLAN10
• Set up VLAN routing
• Set up load balancing using First-Hop Redundancy Protocol
• Set up DHCP

Inter-VLAN Routing Configuration

For each router, configure this replacing {x} with the router number:

enable
configure terminal
hostname R{x}

interface fastEthernet 0/0
no shutdown

interface fastEthernet 0/0.10
ip address 10.10.0.{x} 255.255.0.0
encapsulation dot1q 10
no shutdown

interface fastEthernet 0/0.20
ip address 10.20.0.{x} 255.255.0.0
encapsulation dot1q 20
no shutdown

exit
exit
disable
exit

First-Hop Redundancy Protocol Setup

On each router:

enable
configure terminal

interface fastEthernet 0/0.10
standby 1 ip 10.10.0.111

interface fastEthernet 0/0.20
standby 2 ip 10.20.0.222

exit
exit
disable
exit

DHCP Configuration

On each router:

enable
configure terminal

ip dhcp pool Pool10
network 10.10.0.0 255.255.0.0
default-router 10.10.0.111

ip dhcp pool Pool20
network 10.20.0.0 255.255.0.0
default-router 10.20.0.222

exit
exit
disable
exit